Sailing With the Stars: International Space Station

Sailing With the Stars: International Space StationBringing ET-134 to Kennedy Space Center has one purpose; launch STS-130 to the International Space Station. NASA's top priority today is to fly the space shuttle safely and complete construction of the space station. It's been a long road getting from there to here!

Scroll over to your right, then down to space station over flights of your town. Click and you'll find yourself on a NASA Johnson Space Center Website. In the left column you'll find a place to enter your country and find your home town and that'll show you when the space station will overfly your town.

The over flight will be fast; and the time of day is important because space station is best viewed just before dawn or the beginning of morning nautical twilight and just after fading evening light or the ending of evening nautical twilight; perhaps the station will approach from the southwest, sail over your town in 2-5 minutes at 220 miles above you and depart to the Northeast.

I hadn't made an effort to see the station over fly Huntsville, Ala., for quite some time, until one day last year I studied the tracking charts, found that it would make a spectacular flight over Huntsville in a few days. That evening I hooked up my two bichons and went out to see the station. It was an amazing over flight. With ten-power binoculars I could detect a great deal of detail including that the space shuttle was docked, a gigantic spread of sail, or rather, solar arrays, and the space station had grown -- big time -- to the size of a football field.

When I joined NASA in 1991, I was immediately joined at the hip with space station. It has been part of my daily duties ever since in one public affairs capacity or another. The space station has evolved from development models and design charts to real hardware during the intervening years. It is simply a marvel, flying through space at 17,000 miles per hour, brighter than the stars; so much so you might say it is a star...well, it is a Star!


  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Nasa Technology Infusion : (STTR)

Nasa Technology Infusion : (STTR)

The Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) Programs provide an opportunity for small, high technology companies and research institutions (RI) to participate in Government sponsored research and development (R&D) efforts in key technology areas.

If you are a small business concern with 500 or fewer employees, or a non-profit RI, such as a university or a research laboratory with ties to a Small Business Concern (SBC), then NASA encourages you to learn more about these programs and significant sources of seed funding for the development of your innovations. The SBIR Phase 1 contracts last for 12 months with a maximum funding of $100,000, and Phase 2 contracts last for 24 months with a maximum funding of $600,000.

NASA issues annual program solicitations that set forth a substantial number of R/R&D topics and subtopic areas consistent with stated agency needs or missions. Both the list of topics and the description of the topics and subtopics are sufficiently comprehensive to provide a wide range of opportunity for Small Business Concerns (SBC) to participate in NASA research or R&D programs. Topics and subtopics emphasize the need for proposals with advanced concepts to meet specific agency R/R&D needs.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

NASA Innovation Partnerships Program (IPP)

Much of what we gain from our space exploration is in the scientific and technological progress that comes in the process of doing it. Many of those technologies are the direct result of NASA supported funding for both internal R&D projects performed at NASA centers and external research from the small business community.

As a result of these expanding needs for new capabilities to explore space, NASA missions often result in technologies which have applications beyond aerospace. These technologies while targeted for integration into the mainstream NASA flight programs, can also be commercialized creating new marketplace products and provide opportunities for improving the quality of life for the American public right here on earth.

For NASA, Technology infusion is the process of strategically binding technical needs and potential solutions. These innovative solutions, be they hardware or software; enhancing or enabling; near-term or far-term; low Technology Readiness Level (TRL) or High TRL, NASA internally or externally developed; must all be managed through some aspect of transition from their originating source to the targeted challenges within NASA's programs and projects.

The IPP, Technology Infusion Element includes the Small Business Innovative Research (SBIR) , the Small Business Technology Transfer (STTR) and the IPP Seed Fund . Together these programs provide pathways from these originating sources to IPPs' technology portfolio, and provide enabling infrastructures that enhance the infusion of these technologies in NASA missions and programs. These programs allow the agency to implement successful technology

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Ferrofluid NASA technology

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Teams Win at NASA National Lunar Robotics Competition

Nineteen teams pushed their robot competitors to the limit, and three teams claimed a total of $750,000 in NASA prizes at this year's Regolith Excavation Challenge on Oct. 18. This is the first time in the competition's three-year history that any team qualified for a cash prize, the largest NASA has awarded to date.


After two days of intense competition hosted at NASA's Ames Research Center at Moffett Field, Calif., organizers conferred first place prize of $500,000 to Paul's Robotics of Worcester, Mass. Terra Engineering of Gardena, Calif., was a three-time returning competitor and was awarded second place prize of $150,000, and Team Braundo of Rancho Palos Verde, Calif., took the third place of $100,000 as a first-time competitor.

Competitors were required to use mobile, robotic digging machines capable of excavating at least 330 pounds of simulated moon dirt, known as regolith, and depositing it into a container in 30 minutes or less. The rules required the remotely controlled vehicles to contain their own power sources and weigh no more than 176 pounds.

The winning excavator lifted 1,103 pounds within the allotted time. Runners-up excavated 595 pounds and 580 pounds, respectively. Team E-REX of Little Rock, Ark., earned a special mention for transferring the most regolith in a single deposit -- 165 pounds.

"It's really encouraging that we saw three teams achieve the minimum requirements and shows that innovation is not only alive but growing," said Lynn Baroff, executive director of the California Space Education and Workforce Institute, who lead the panel of judges. "It's really great that through this competition NASA is actively seeking to recognize citizen inventors from across the nation whose ideas may one day contribute to space exploration."

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Nasa New Technology : Suit Ports

The Lunar Electric Rover (LER) is equipped with a time and space saving concept called suit ports. The suit ports are located on the aft bulkhead of the LER, and are designed to allow astronauts to quickly go from driving in a shirtsleeve environment to Extravehicular Activity (EVA) in their space suits. The suit port will allow the crew to enter and exit their EVA suits via a rear-entry hatch, while never having to bring the suit inside, keeping the internal cabin mostly free of dust.

The suit port will also minimize the loss of consumables when it is depressurized for EVA, extending duration of an LER sortie. The crew uses alignment guides for docking to the suit port, and electromechanical mechanisms to lock and unlock the suit in place and also to open and close hatches. This is an upgrade from last year's suit port concept that used all mechanically-actuated mechanisms with levers that the crew had to move. This suit port concept also includes an environmental shelter for the suits that will protect them from dust, thermal extremes, and micrometeoroid protection.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Exploration Technology Development Program

Exploration Technology Development ProgramThe Exploration Technology Development Program (ETDP) develops new technologies that will enable NASA to conduct future human exploration missions, while reducing mission risk and cost. The primary customers of the ETDP are the designers of flight systems in the Constellation Systems Program. By maturing new technologies to the level of demonstration in a relevant environment early enough to support a flight system's Preliminary Design Review (PDR), NASA can significantly reduce both cost and risk.

ETDP is currently maturing near-term technologies to enable first flight of the Orion in 2014, and developing long-lead technologies needed for the lunar exploration missions no later than 2020.

Exploration Technology Development Program Projects

The projects in the ETDP were formulated to address the high priority technology needs for lunar exploration identified by the Exploration Systems Architecture Study (ESAS), with further refinement by the Lunar Architecture Team (LAT). All technology projects are managed at NASA Centers.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

NASA Launches New Technology: An Inflatable Heat Shield

A successful NASA flight test has shown that a spacecraft returning to Earth can use an inflatable heat shield to slow and protect itself as it enters the atmosphere at hypersonic speeds. This was the first time anyone has successfully flown an inflatable reentry capsule, according to engineers at NASA's Langley Research Center .

The Inflatable Re-entry Vehicle Experiment, or IRVE, was vacuum-packed into a 15-inch diameter payload "shroud" and launched on a small sounding rocket from NASA's Wallops Flight Facility on Wallops Island, Va. Nitrogen inflated the 10-foot (3 m) diameter heat shield, made of several layers of silicone-coated industrial fabric, to a mushroom shape in space several minutes after liftoff.

"This was a huge success," said Mary Beth Wusk, IRVE project manager, based at Langley . "IRVE was a small-scale demonstrator. Now that we've proven the concept, we'd like to build more advanced aeroshells capable of handling higher heat rates."

The Black Brant 9 rocket took about four minutes to lift the experiment to an altitude of 131 miles (211 km). Less than a minute later it was released from its cover and started inflating on schedule at 124 miles (199.5 km) up. The inflation of the shield took less than 90 seconds.

"Everything performed well even into the subsonic range where we weren't sure what to expect," said Neil Cheatwood, IRVE principal investigator and chief scientist for the Hypersonics Project of NASA's Aeronautics Research Mission Directorate's Fundamental Aeronautics Program. "The telemetry looks good. The inflatable bladder held up well."

Inflatable heat shields hold promise for future planetary missions, according to researchers. To land more mass on Mars at higher surface elevations, for instance, mission planners need to maximize the drag area of the entry system.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Hot Air, Champagne and a Sword - Tom Tschida's First Balloon Ride

The view from the gondola of a hot-air balloon gives one a glimpse into the reasons why ballooning is a popular hobby, according to Tom Tschida, a photographer at NASA's Dryden Flight Research Center at Edwards, Calif.

Tschida experienced his first view from aloft in a hot air balloon named Peacock on a brisk morning during the 2009 Albuquerque International Balloon Fiesta. Tschida had only briefly seen a hot air balloon up close prior to the event.

"I hung out with the crew as the balloon was readied," Tschida recalled. "The pilot, Randy Wright, briefed the Peacock's crew about what would happen. A set of stairs was brought over for us to climb into the balloon. The crew did everything else," he added.

Tschida had previously done some skydiving, so he imagined that the experience would be similar. Once aloft, the flight was peaceful and calm as the balloon drifted, but he noted that the burst of flame from the burner used to heat the air that kept the balloon aloft was loud.

Tschida's photographic creative juices also flowed in different ways in the air. "Up in the balloon, I naturally shot more wide than I did on the ground to take advantage of the different perspectives," he said. "From the air you experience and see the whole thing and the view - which must be the biggest draw for balloonists."

As the balloon drifted over the Rio Grande , Wright dipped the balloon's gondola and its occupants in twice as part of a tradition, soaking them in cold water, before ascending again. Tschida admitted the landing was exhilarating and a bit rough as the gondola hit the ground and slid to a stop about 20 feet from its touchdown spot.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

NASA Ames Hosts White House CIO

Vivek Kundra, the federal chief information officer, announced a new government cloud computing initiative at NASA’s Ames Research Center, Moffett Field, Calif., on Sept. 15, 2009.

Kundra unveiled the new Apps.gov platform, an online storefront for federal agencies to browse and purchase cloud-based information technology (IT) services and predicted it would significantly lower government costs and increase innovation.

"This technology supports every mission our government performs— from defending our borders to protecting the environment," Kundra said. "IT is essential for the government to do its work, and it is essential that we have access to the latest and most innovative technologies."

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS